About this product

No more using your hands to hold the door open, just need to step on it

Premium material :Made of Zinc Alloy Material for Long Durability, Sufficient Hardness and Corrosion Resistance.

Sturdy Spring Holds the Stop in the Up Position Firmly

Works on Various Surfaces: Carpet,Wood, Cement,Stone Linoleum, Tiles

Height adjustable with Rubber tip about 0.15 inch

Installation: Determine the correct placement for the stop Open the door to about where it will be held open (usually 90 degrees). Hold the stop in place at the location you chose. Check to see if the rubber shoe at the base sits flat on the floor. It should not be tilted to either end, but should be completely flat and tight to the floor. If it doesn't fit flat, move the stop up or down on the door, until the shoe fits tight to the floor. Mark the screw locations on the door using a pencil. Pre-drill holes for the screws, then fasten the stop to the door. Make sure not to drill all the way through the the other face of the door. Test the stop to make sure it is holding the door open as desired.